Technical data - electrical rating |
Voltage supply: | 10...30 VDC |
Reverse polarity protection: | Yes |
Consumption w/o load: | ≤50 mA (24 VDC) |
Initializing time (typ.): | 20 ms after power on |
Interfaces: | SSI, Incremental A 90? B, (optional) |
Function: | Multiturn |
Steps per turn: | 16384 / 14 bit |
Number of turns: | 4096 / 12 bit |
Incremental output: | 2048 pulses A90?B, + inverted |
Absolute accuracy: | ?0.025 ? |
Sensing method: | Optical |
Code: | Gray or binary |
Code sequence: | CW/CCW coded by connection |
Inputs: | SSI clock, Control signals UP/DOWN and, zero |
Output circuit: | SSI data: linedriver RS485, Diagnostic outputs push-pull |
Interference immunity: | DIN EN 61000-6-2 |
Emitted interference: | DIN EN 61000-6-4 |
Diagnostic functions: | Self-diagnosis, Code continuity check, Multiturn sensing |
Approval: | UL approval / E63076 |
Technical data - mechanical design |
Housing: | ?58 mm |
Shaft: | ?12 mm hollow shaft, ?14 mm hollow shaft |
Protection DIN EN 60529: | IP 54 |
Operating speed: | ≤6000 rpm (mechanical), ≤6000 rpm (electric) |
Starting torque: | ≤0.04 Nm IP 54 |
Rotor moment of inertia: | 20 gcm? |
Materials: | Housing: aluminium, Flange: aluminium |
Operating temperature: | -25...+85 ?C, -40...+85 ?C (optional) |
Relative humidity: | 95 % non-condensing |
Resistance: | DIN EN 60068-2-6, Vibration 10 g, 16-2000 Hz, DIN EN 60068-2-27, Shock 200 g, 6 ms |
Weight approx: | 400 g |
Connection: | Cable 1 m, Connector M23, 12-pin, |