TACHOGENERATORS

Encoders UK are now the leading HUBNER UK distributor for the entire range of HUBNER TACHOGENERATORS and encoders.

Tachogenerators measure speed and direction of rotation via an out put voltage signal that is directly proportional to the speed.

Tachogenerators are used to convert mechanical energy into electrical energ, or to convert the revolution of a shaft of a generator to an analog voltage.

If the Tachogenerator you require is not listed, please view the Baumer Catalogue, or alternatively contact us

GMP 1,0 Tachogenerator

Brand:	Tachogenerators
Open-circuit voltage:	40...175 mV per rpm
Shaft:	ø12...14 mm
Housing:	ø110 mm
Features:	High response speed, Recognition of sense of rotation, Patented LongLife technique, With own bearings
	Read MoreEnquire Now

GT 5 Tachogenerator

Brand:	Tachogenerators
Open-circuit voltage:	7...10 mV per rpm
Shaft:	ø8...12 mm end shaft
Housing:	ø52 mm
Features:	High response speed, Recognition of sense of rotation, Patented LongLife technique, No auxiliary energy source required
	Read MoreEnquire Now

GT 9 Tachogenerator

Brand:	Tachogenerators
Open-circuit voltage:	10...20 mV per rpm
Shaft:	ø12...16 mm end shaft, ø17 mm cone shaft 1:10
Housing:	ø89 mm
Features:	High response speed, Recognition of rotating direction, Patented LongLife technique, No auxiliary energy source required
	Read MoreEnquire Now

GTB 9 Tachogenerator

Brand:	Tachogenerators
Open-circuit voltage:	10...20 mV per rpm
Shaft:	ø12...16 mm end shaft, ø17 mm cone shaft 1:10
Housing:	ø95 mm
Features:	High response speed, Recognition of rotating direction, Patented LongLife technique, No auxiliary energy source required, High protection standard IP 68
	Read MoreEnquire Now

GTR 9 Tachogenerator

Brand:	Tachogenerators
Open-circuit voltage:	20...60 mV per rpm
Shaft:	ø16 mm end shaft
Housing:	ø95 mm
Features:	High response speed, Recognition of rotating direction, Patented LongLife technique, No auxiliary energy source required
	Read MoreEnquire Now

TDP 0,02 Tachogenerator

Brand:	Tachogenerators
Open-circuit voltage:	10...150 mV per rpm
Shaft:	ø7...14 mm
Housing:	ø90 mm
Features:	High response speed, Recognition of rotating direction, Patented LongLife technique, No auxiliary energy source required, EURO flange B10
	Read MoreEnquire Now

TDP 0,09 Tachogenerator

Brand:	Tachogenerators
Open-circuit voltage:	10...60
Shaft:	ø6 mm
Housing:	10...60 mV per rpm
Features:	High response speed, Recognition of rotating direction, Patented LongLife technique, No auxiliary energy source required, EURO flange B10
	Read MoreEnquire Now

TDP 13 Tachogenerator

Brand:	Tachogenerators
Open-circuit voltage:	20...200 mV per rpm
Shaft:	ø14...18 mm
Housing:	ø126 mm
Features:	High response speed, Recognition of rotating direction, Patented LongLife technique, No auxiliary energy source required, High response speed
	Read MoreEnquire Now

Encoders UK - Official UK Distributor of Hübner Tachogenerators