Baumer Product Catalogue
All of the Baumer products we supply can be found in the Baumer catalogue which is downloadable here
Baumer Fiber-optic transmitter: LWL-SHR
Signal Processing
- Transmission length up to 1500 m
- Converting standard square-wave signals into optical signals
- Transmission error detection via checksum (CRC)
- High-precision transmission of signals (Jitter <100 ns)
- Constant delay time <20 μs
- Automatic channel switchover in realtime upon failure of one fiber-optic channel
| Voltage supply: | 9...30 VDC |
|---|---|
| Transmission length: | ≤1500 m |
| Wave length: | ~820 nm |
| Start time: | <500 ms |
| Outputs: | Fiber1, Fiber2 |
| Input signals: | K1, K2, K0 + inverted Err + inverted |
| Inputs: | HTL, TTL |
| Consumption: | ≤300 mA |
| Dimensions W x H x L: | 100 x 75 x 53 mm |
|---|---|
| Protection DIN EN 60529: | IP 20 |
| Operating temperature: | -20...+70 °C (without dew) |
| Connection: | Screw terminal connector 2x ST connector |
| Housing type: | Mounting on standard rails according to EN 50022 |
Enquire About Baumer Fiber-optic transmitter: LWL-SHR
If you have any questions or queries please don’t hesitate to get in touch.
We aim to respond to all messages within 48 hours.