Baumer HS35F

Baumer HS35F

Incremental encoders

  • Robust industrial encoder up to IP 67 protection
  • Shock resistant up to 200 g's
  • Insulating insert to prevent high shaft currents from damaging bearings
  • Wide range voltage supply 4.75...30 VDC
  • Precision ≤60 arc-seconds for perfect process control
  • Max. 80000 pulses per revolution
Voltage supply: 4.75...30 VDC
Approval: UL approval / file no. E240061 RoHS compliant EU guideline 2011/65/EC CE
Emitted interference: DIN EN 61000-6-3
Interference immunity: DIN EN 61000-6-2
Output stages: Linedriver (TTL, 7272) Vout = 5 V, short-circuit proof Push-pull (HTL, 7272) Vout = Vin, short-circuit proof Open Collector (OC, 7273) Vout = Vin, short-circuit proof
Output signals: A, B, Z A, B, Z + complement, ½ cycle index gated with negative B channel
Output frequency: ≤300 kHz (TTL) ≤160 kHz (HTL) ≤160 kHz (OC)
Sensing method: Optical
Accuracy: ≤60 arc-seconds
Pulses per revolution: 1024 … 80000
Consumption w/o load: ≤40 mA (24 VDC) ≤130 mA (4.75 VDC) + output load, max. 250 mA
Reverse polarity protection: Yes
Service life: Bearing: typ. 13 billion rev. (89000 h/2500 rpm)
Material: Housing: aluminium, powder-coated Shaft: stainless steel
Operating temperature: -40...+212 °F (-40...+100 °C), (fixed cable): see temperature diagram
Relative humidity: 98 % non-condensing
Resistance: DIN EN 60068-2-6 Vibration 20 g, 60-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms
Connection: MIL-connector, 7-pin MIL-connector, 10-pin Cable (AWG26 wire)
Rotor moment of inertia: 2,3 oz-in² (420 gcm²)
Starting torque: ≤3 in-oz (77 °F, IP 65) ≤0,02 Nm (+25 °C, IP 65)
Bearing: 52100 SAE high carbon steel (ABEC 5)
Operating speed: ≤5000 rpm (see temperature diagram)
Protection DIN EN 60529: IP 54 IP 65 IP 67
Admitted misalignment: 0.004" (0.1016 mm) radial TIR (end of shaft) 0.01" (0.254 mm) axial
Bore runout: 0.0016" (0.04 mm) TIR max.
Shaft type: ø0.375...1" (ø9.525...25.4 mm) (through hollow shaft isolated)
Size (flange): ø3.15" (ø80 mm)
Weight approx.: 23 oz. 660 g

Declaration of conformity - Incremental encoders EIL580-, HS35-, ITD2x-, ITD3-, ITD4x-, ITD6x-, ITD70-, TIL- series and ITD- combination

  • PDF
  • 273.87 KB
Download

3D CAD - Reducer insert HS35 ø0.625” (ø15.875 mm) - 3D drawing / STEP

  • ZIP
  • 24.5 KB
Download

3D CAD - Reducer insert HS35 ø0.50” (ø12.7 mm) - 3D drawing / STEP

  • ZIP
  • 21.7 KB
Download

3D CAD - Reducer insert HS35 ø0.375” (ø9.525 mm) - 3D drawing / STEP

  • ZIP
  • 21.85 KB
Download

3D CAD - HS35 3D drawing connector 10-pin, ø25.4 mm, IP67 / STEP

  • ZIP
  • 755.54 KB
Download

3D CAD - HS35 3D drawing connector 10-pin, ø25.4 mm, IP67 / PDF

  • PDF
  • 614.32 KB
Download

3D CAD - HS35 3D drawing connector 10-pin, ø25.4 mm, IP54/IP65 / STEP

  • ZIP
  • 683.76 KB
Download

3D CAD - HS35 3D drawing connector 10-pin, ø25.4 mm, IP54/IP65 / PDF

  • PDF
  • 577.23 KB
Download

3D CAD - HS35 3D drawing connector 10-pin, ø25.4 mm, IP67 / STEP

  • ZIP
  • 755.54 KB
Download

3D CAD - Reducer insert HS35 ø0.75” (ø19.05 mm) - 3D drawing / STEP

  • ZIP
  • 22.01 KB
Download

3D CAD - Reducer insert HS35 ø0.87” (ø22.225 mm) - 3D drawing / STEP

  • ZIP
  • 17.08 KB
Download

3D CAD - Protective cover HS35 - 3D drawing / STEP

  • ZIP
  • 3.12 MB
Download

3D CAD - Reducer insert HS35 ø20 mm - 3D drawing / STEP

  • ZIP
  • 21.74 KB
Download

3D CAD - Reducer insert HS35 ø18 mm - 3D drawing / STEP

  • ZIP
  • 21.78 KB
Download

3D CAD - Reducer insert HS35 ø16 mm - 3D drawing / STEP

  • ZIP
  • 22.16 KB
Download

3D CAD - Reducer insert HS35 ø15 mm - 3D drawing / STEP

  • ZIP
  • 22.3 KB
Download

3D CAD - Reducer insert HS35 ø14 mm - 3D drawing / STEP

  • ZIP
  • 24.15 KB
Download

3D CAD - Reducer insert HS35 ø12 mm - 3D drawing / STEP

  • ZIP
  • 22.19 KB
Download

3D CAD - Reducer insert HS35 ø10 mm - 3D drawing / STEP

  • ZIP
  • 22.08 KB
Download

3D CAD - HS35 3D drawing connector 10-pin, ø25.4 mm, IP67 / PDF

  • PDF
  • 614.32 KB
Download

3D CAD - HS35 3D drawing connector 7-pin, ø25.4 mm, IP54/IP65 / STEP

  • ZIP
  • 791.33 KB
Download

3D CAD - HS35 3D drawing connector 7-pin, ø25.4 mm, IP54/IP65 / PDF

  • PDF
  • 487.05 KB
Download

3D CAD - Tether T1 - 3D drawing / STEP

  • ZIP
  • 52.33 KB
Download

3D CAD - Tether T1 - 3D drawing / PDF

  • PDF
  • 266.6 KB
Download

Certificates / approvals - UL certificate E240061

  • PDF
  • 668.3 KB
Download

Installation and operating instructions - Protective cage HS35

  • PDF
  • 236.24 KB
Download

Installation and operating instructions - Protective cage HS35

  • PDF
  • 236.47 KB
Download

Installation and operating instructions - HS35

  • PDF
  • 5.62 MB
Download

Data sheet - Data sheet – HS35F

  • PDF
  • 8 MB
Download

Data sheet - Data sheet – HS35F

  • PDF
  • 7.97 MB
Download

3D CAD - Tether T3 - 3D drawing / PDF

  • PDF
  • 255.81 KB
Download

3D CAD - Tether T3 - 3D drawing / STEP

  • ZIP
  • 51.74 KB
Download

3D CAD - HS35 3D drawing cable, ø25.4 mm, IP67 / STEP

  • ZIP
  • 949.12 KB
Download

3D CAD - HS35 3D drawing cable, ø25.4 mm, IP67 / PDF

  • PDF
  • 456.33 KB
Download

3D CAD - HS35 3D drawing cable, ø25.4 mm, IP54/IP65 / STEP

  • ZIP
  • 878.42 KB
Download

3D CAD - HS35 3D drawing cable, ø25.4 mm, IP54/IP65 / PDF

  • PDF
  • 418.68 KB
Download

3D CAD - Tether T5 - 3D drawing / STEP

  • ZIP
  • 52.5 KB
Download

3D CAD - Tether T5 - 3D drawing / PDF

  • PDF
  • 254.56 KB
Download

3D CAD - Tether T4 - 3D drawing / STEP

  • ZIP
  • 51.55 KB
Download

3D CAD - Tether T4 - 3D drawing / PDF

  • PDF
  • 254.87 KB
Download

Data sheet - Data sheet – HS35F

  • PDF
  • 8.12 MB
Download

Enquire About Baumer HS35F

If you have any questions or queries please don’t hesitate to get in touch.
We aim to respond to all messages within 48 hours.

Baumer Product Catalogue

All of the Baumer products we supply can be found in the Baumer catalogue which is downloadable here