Call us on (+44) 0121 378 5577
Products
Baumer OptoPulse® EIL580P-B

Baumer OptoPulse® EIL580P-B

Incremental encoders

  • Size ø58 mm
  • Precise optical sensing (interpolated)
  • Output signal level programmable (TTL or HTL)
  • Blind hollow shaft, ø8…15 mm
  • Connection axial, radial or tangential
  • Pulses per revolution 1...65536, programmable
  • High protection up to IP 67
  • High resistance to shock and vibrations
information
Output frequency: ≤300 kHz (TTL) ≤160 kHz (HTL)
Sensing method: Optical
Reference signal: Zero pulse 90° or 180°
Output signals: A+, B+, R+, A-, B-, R-
Output stages: TTL/RS422 HTL/push-pull
Programmable parameters: Output level TTL/HTL Pulse number 1...65536 Zero pulse width 90°/180° Zero pulse position Signal sequence
Emitted interference: DIN EN 61000-6-3
Interference immunity: DIN EN 61000-6-2
Approval: UL 508 / CSA 22.2
Reverse polarity protection: Yes
Short-circuit proof: Yes
Duty cycle: 45…55 % typical at 1024, 2048 ppr (further see table Duty cycle)
Pulses per revolution: 1 … 65536
Initializing time: ≤30 ms after power on
Consumption w/o load: ≤70 mA
Voltage supply: 4.75...30 VDC
Starting torque: ≤0,02 Nm (+20 °C, IP 65) ≤Nm (+20 °C, IP 67)
Operating speed: ≤6000 rpm (+20 °C, IP 67) ≤8000 rpm (+20 °C, IP 65)
Protection DIN EN 60529: IP 65 (without shaft seal) IP 67 (with shaft seal)
Shaft type: ø8...15 mm (blind hollow shaft) ø9.52 mm (blind hollow shaft) ø12.7 mm (blind hollow shaft)
Size (flange): ø58 mm
Material: Housing: aluminium die-cast Flange: aluminium
Connection: Flange connector M12, 8-pin Flange connector M23, 12-pin Cable
Resistance: DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 250 g, 6 ms
Relative humidity: 90 % non-condensing
Operating temperature: -40...+100 °C
Weight approx.: 300 g

Data sheet - Data sheet – EIL580P-B

  • PDF
  • 4.32 MB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, stator coupling, IP65 / STEP (EIL580-BT14.5Ax.xxxxx.A)

  • ZIP
  • 756.63 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, without stator coupling, IP67 / STEP (EIL580-BN14.7Ax.xxxxx.A)

  • ZIP
  • 663.1 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, without stator coupling, IP65 / STEP (EIL580-BN14.5Ax.xxxxx.A)

  • ZIP
  • 661.83 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, pin torque support 3 mm, IP67 / STEP (EIL580-BP14.7Bx.xxxxx.A)

  • ZIP
  • 654.69 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, without stator coupling, IP65 / STEP (EIL580-BN14.5Dx.xxxxx.A)

  • ZIP
  • 457.48 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, pin torque support 3 mm, IP67 / STEP (EIL580-BP14.7Fx.xxxxx.A)

  • ZIP
  • 465.94 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Fx.xxxxx.A)

  • ZIP
  • 448.8 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, stator coupling, IP67 / STEP (EIL580-BT14.7Fx.xxxxx.A)

  • ZIP
  • 541.43 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, stator coupling, IP65 / STEP (EIL580-BT14.5Fx.xxxxx.A)

  • ZIP
  • 528.71 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, without stator coupling, IP67 / STEP (EIL580-BN14.7Fx.xxxxx.A)

  • ZIP
  • 457.26 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 radial, without stator coupling, IP65 / STEP (EIL580-BN14.5Fx.xxxxx.A)

  • ZIP
  • 428.02 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, stator coupling, IP67 / STEP (EIL580-BT14.7Ax.xxxxx.A)

  • ZIP
  • 750.95 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Ax.xxxxx.A)

  • ZIP
  • 831.16 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, pin torque support 3 mm, IP67 / STEP (EIL580-BP14.7Tx.xxxxx.A)

  • ZIP
  • 708.65 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, without stator coupling, IP65 / STEP (EIL580-BN14.5Rx.xxxxx.A)

  • ZIP
  • 631.1 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, without stator coupling, IP67 / STEP (EIL580-BN14.7Rx.xxxxx.A)

  • ZIP
  • 649.4 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, stator coupling, IP65 / STEP (EIL580-BT14.5Rx.xxxxx.A)

  • ZIP
  • 716.24 KB
Download

Declaration of conformity - Incremental encoders EIL580-, HS35-, ITD2x-, ITD3-, ITD4x-, ITD6x-, ITD70-, TIL- series and ITD- combination

  • PDF
  • 273.87 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Bx.xxxxx.A)

  • ZIP
  • 636.75 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, stator coupling, IP67 / STEP (EIL580-BT14.7Bx.xxxxx.A)

  • ZIP
  • 734.49 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, stator coupling, IP65 / STEP (EIL580-BT14.5Bx.xxxxx.A)

  • ZIP
  • 720.84 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, without stator coupling, IP67 / STEP (EIL580-BN14.7Bx.xxxxx.A)

  • ZIP
  • 648.57 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 radial, without stator coupling, IP65 / STEP (EIL580-BN14.5Bx.xxxxx.A)

  • ZIP
  • 1.94 MB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M12 axial, pin torque support 3 mm, IP67 / STEP (EIL580-BP14.7Ax.xxxxx.A)

  • ZIP
  • 673.59 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, pin torque support 3 mm, IP67 / STEP (EIL580-BP14.7Dx.xxxxx.A)

  • ZIP
  • 477.91 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Dx.xxxxx.A)

  • ZIP
  • 464.25 KB
Download

Installation and operating instructions - EIL580

  • PDF
  • 1.62 MB
Download

Data sheet - Data sheet – EIL580P-B

  • PDF
  • 4.34 MB
Download

Data sheet - Data sheet – EIL580P-B

  • PDF
  • 4.32 MB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, stator coupling, IP67 / STEP (EIL580-BT14.7Tx.xxxxx.A)

  • ZIP
  • 792.31 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Tx.xxxxx.A)

  • ZIP
  • 696.2 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, stator coupling, IP67 / STEP (EIL580-BT14.7Px.xxxxx.A)

  • ZIP
  • 1.33 MB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, stator coupling, IP65 / STEP (EIL580-BT14.5Px.xxxxx.A)

  • ZIP
  • 1.32 MB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, without stator coupling, IP67 / STEP (EIL580-BN14.7Px.xxxxx.A)

  • ZIP
  • 1.21 MB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, without stator coupling, IP65 / STEP (EIL580-BN14.5Px.xxxxx.A)

  • ZIP
  • 1.23 MB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, pin torque support 3 mm, IP67 / STEP (EIL580-BP14.7Rx.xxxxx.A)

  • ZIP
  • 654.62 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Rx.xxxxx.A)

  • ZIP
  • 637.66 KB
Download

Certificates / approvals - UL certificate E240061

  • PDF
  • 668.3 KB
Download

Brochures / Catalogs - EIL580P Programmable

  • PDF
  • 927.41 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, stator coupling, IP67 / STEP (EIL580-BT14.7Dx.xxxxx.A)

  • ZIP
  • 647.19 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, stator coupling, IP65 / STEP (EIL580-BT14.5Dx.xxxxx.A)

  • ZIP
  • 630 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, connector M23 axial, without stator coupling, IP67 / STEP (EIL580-BN14.7Dx.xxxxx.A)

  • ZIP
  • 471.77 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, pin torque support 3 mm, IP67 / STEP (EIL580-BP14.7Px.xxxxx.A)

  • ZIP
  • 1.25 MB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable tangential, pin torque support 3 mm, IP65 / STEP (EIL580-BP14.5Px.xxxxx.A)

  • ZIP
  • 1.2 MB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, stator coupling, IP65 / STEP (EIL580-BT14.5Tx.xxxxx.A)

  • ZIP
  • 774.22 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, without stator coupling, IP67 / STEP (EIL580-BN14.7Tx.xxxxx.A)

  • ZIP
  • 702.38 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable axial, without stator coupling, IP65 / STEP (EIL580-BN14.5Tx.xxxxx.A)

  • ZIP
  • 694.41 KB
Download

Software - Encoder Software v3.3 05.07.16

  • ZIP
  • 6.84 MB
Download

Brochures / Catalogs - EIL580P Programmable

  • PDF
  • 929.22 KB
Download

Brochures / Catalogs - EIL580P Programmable

  • PDF
  • 928.86 KB
Download

3D CAD - EIL580: Blind hollow shaft ø14 mm, clamping ring at A side, cable radial, stator coupling, IP67 / STEP (EIL580-BT14.7Rx.xxxxx.A)

  • ZIP
  • 731.4 KB
Download

Enquire About Baumer OptoPulse® EIL580P-B

If you have any questions or queries please don’t hesitate to get in touch.
We aim to respond to all messages within 48 hours.

Baumer Product Catalogue

All of the Baumer products we supply can be found in the Baumer catalogue which is downloadable here

Download