Baumer Product Catalogue
All of the Baumer products we supply can be found in the Baumer catalogue which is downloadable here
Baumer TDP 0,2 + OG 9, TDPZ 0,2 + OG 9
Tachogenerators - combination
- Logic level HTL or TTL
- Low response time
- Open circuit voltage 10...150 mV per rpm
- Redundant tachogenerator output (TDPZ)
- EURO flange B10 or housing foot B3
- High signal quality due to patented LongLife technology
- Recognition of sense of rotation possible via control
| Voltage supply: | 9...30 VDC 5 VDC ±5 % 9...26 VDC |
|---|---|
| Sensing method: | Optical |
| Output stages: | HTL-P (power linedriver) TTL/RS422 |
| Output signals: | K1, K2, K0 + inverted |
| Output frequency: | ≤120 kHz (≤300 kHz on request) |
| Reference signal: | Zero pulse, width 90° |
| Duty cycle: | 40…60 % |
| Phase shift: | 90 ° ±20° |
| Pulses per revolution: | 25 … 5000 |
| Consumption w/o load: | ≤100 mA |
| Protection DIN EN 60529: | IP 55 |
|---|---|
| Operating speed: | ≤10000 rpm |
| Torque: | 1,5 Ncm |
| Rotor moment of inertia: | 1,4 kgcm² (TDP) 1,5 kgcm² (TDPZ) |
| Material: | Housing: aluminium die-cast Shaft: stainless steel |
| Operating temperature: | -30...+100 °C -25...+100 °C (>3072 pulses) |
| Resistance: | IEC 60068-2-6 Vibration 10 g, 10...2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms |
| Connection: | 2x terminal box |
| Weight approx.: | 3,3 kg (TDP) 3,5 kg (TDPZ) |
| Interference immunity: | EN 61000-6-2 |
| Emitted interference: | EN 61000-6-3 |
| Flange: | EURO flange B10 Housing foot B3 |
| Admitted shaft load: | ≤60 N axial ≤80 N radial |
| Reversal tolerance: | ≤0,1 % |
| Linearity tolerance: | ≤0,15 % |
| Temperature coefficient: | ± 0,05 %/K (open-circuit) |
| Isolation class: | B |
| Calibration tolerance: | ±1 % |
| Climatic test: | Humid heat, constant (IEC 60068-2-3, Ca) |
| Performance: | TDP: 12 W (speed ≥3000 rpm) TDPZ: 2x 3 W (speed ≥3000 rpm) |
| Armature-circuit time-constant: | <75 40 µs (TDPZ) |
| Open-circuit voltage: | TDP: 10...150 mV per rpm TDPZ: 20...100 mV per rpm |
| Size (flange): | ø115 mm |
| Shaft type: | ø11 mm solid shaft |
| Approval: | CE |
Enquire About Baumer TDP 0,2 + OG 9, TDPZ 0,2 + OG 9
If you have any questions or queries please don’t hesitate to get in touch.
We aim to respond to all messages within 48 hours.